Oil water separators
Oil water separators are a legal (and moral) requirement
The Water Resources Act 1991 states that it is an offence that carries a maximum fine of £20,000 to knowingly allow toxic waste to enter surface or ground water. Compressed air condensate falls into this category.
Drymec DrySep separators limit the the environmental damage caused by poor condensate management, helping you to meet your legal and moral obligations.
This data sheet gives you the facts about complying with the Water Resources Act 1991.
Environmental data
Opens a pdf in a new window. Right-click and select 'save file as' to download.
DrySep CT series
Oil water separator
The DrySep CT Series uses a specially designed filter, instead of a weir, to remove the bulk of the oil and any type of condensate drain may be applied.
PURO CT SEPARATOR
SERVICE KIT
DrySep CT series Options
CT condensate distributor CT multi-inlet manifold
CT Condensate distributor
CT Multi-inlet manifold
DrySep 65
Oil water separator
For compressor installations up to 65 cfm 110m3/hr.
Superseded series; no longer manufactured.
Service kits available.
DrySep 100, 300, 750
Oil water separator
For compressor installations up to 65 cfm 110m3/hr.
Duty:
| cfm | m3/hr | |
| Dry Sep100 | 100 | 170 |
| Dry Sep 300 | 300 | 510 |
| Dry Sep 750 | 750 | 1275 |
DrySep 1500
Oil water separator
Covering compressed air installations up to 1500 cfm. Easy to install, operate and service.
Sepremium 2
Oil water separator
The Sepremium range of oil/water separators separates oil from condensate generated by compressed air systems.
Sepremium 5 30
Oil water separator
The Sepremium range of oil/water separators separates oil from condensate generated by compressed air systems.
Self test kit
Condensate kit
To enable the accurate selection of separation materials and to troubleshoot existing separator installations that are problematic or not working.
Place a sample in each bottle. In 72 hours you will know which type of filter to use.
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
Condensate test kit
This test kit indicates oil levels within the condensate.
DrySep WOSm
Oil water separator
The WOSm unit achieves separation of oil from condensate by means of multi stage separation using oleophilic filters and activated carbon.
Replacement carbon bags
Replacement carbon bags
Replacement carbon bags are available to suit all major manufacturers.
Replacement separator elements
Separator elements
The replacement elements offered by Drymec Ltd are manufactured to fit the Denco CF 200 and CF 1000 condensate separators and are designed to have at least the capacity of the original units.
Manufacturers' data is for reference only.
Drymec replacement elements are not original manufacturers' products.
