Compressed Air Dryers
Refrigeration type compressed air dryers
AMD
Refrigeration type dryer
The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection.
Duty: 12-594 cfm, 21-1008 m3/hr
Drymec supply replacement elements for just about any make of filter, for more details click here.
For a filter for this dryer click here.
For a condensate management system for this dryer click here.
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
SL
Refrigeration type dryer
The Friulair SL dryer series is a natural evolution of the patented ALU-DRY heat exchanger. The compact size, optimized layout and innovative solutions maintain the same levels of reliability, quality and attention to detail as the AMD range.
Duty: 14-106 cfm, 24-180 m3/hr
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
DMC Controller
DMC controller models DMC 11, DMC 14, DMC 15 are available with the appropriate sensing probes.
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
TEM
Refrigeration type dryer
ACT
Refrigeration type dryer
ACT Refrigeration type dryers are a high efficiency - low pressure drop dryer.
Duty: 12-5200 cfm 21-8832 m3/hr
Get a filter for this dryer
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
DFE
Refrigeration type dryer
PLH
For working pressures up to 50 bar.
Duty: 15-3569 cfm 25-6060 m3/hr
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
PCD
Refrigeration type chiller dryer
Compressed air chiller producing compressed air
at 5°C
Duty: 7-424 cfm 12-720 m3/hr
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
TDF
Refrigeration type dryer
AHT
High temperature refrigeration type dryer
Refrigeration dryer with alu-dry heat exchanger and integral aftercooler
Duty: 19-371 cfm 33-630 m3/hr
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
ADE
High temperature refrigeration type dryer
HDT
Desiccant type dryer
Pressure dewpoints of -20, -40 and -70°C
Pneumatic versions available
Duty: 11-5336 cfm 19-9060 m3/hr
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
MDD
Modular Desiccant dryer
Pressure dewpoints of -20, -40 and -70°C
Pneumatic versions available
Duty: 3-240 cfm 5-400 m3/hr
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
DFA
Desiccant type dryer
Low flow unit for intermittent use.
Duty: 200 l/min
Medical desiccant type dryer
For medical applications which comply with the requirements of the "Aer medicalis" of the European Pharmacopoeia
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
Point-of-use low-flow desiccant type filter dryer
For low flow point of use applications.
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
NEA Point-of-use dryer series
This series of application dryers can be fitted with the following elements:
- Hopcolite
- Molecular sieve
- Activated carbon
- Activated alumina
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
Point-of-use single shot desiccant type filter dryer
These moisture removing devices are designed to be fitted at the point of use and may not be suitable for breathing air purposes without further treatment.
Download a data sheet
Opens a pdf in a new window. Right-click and select 'save file as' to download.
Inline point-of-use desiccant type filter dryer
Protection against moisture for very small airflows.
Inline point-of-use low-flow desiccant type filter dryer
Protection against moisture for very small airflows.